Diagnosis Procedure

1. Turn ignition switch ON.
2. Check signal between power window main switch harness connector and ground with oscilloscope.

   (+)		(-)	Signal (Reference value)
   power window main switch
   Connector	Terminal
   D5	13	Ground	Courtesy of NISSAN NORTH AMERICA, INC.

Is the inspection result normal?

YES 

GO TO STEP  4.

NO 

GO TO STEP 2  .

1. Turn ignition switch OFF.
2. Disconnect power window main switch connector.
3. Turn ignition switch ON.
4. Check voltage between power window main switch harness connector and ground.

   (+)		(-)	Voltage (V) (Approx.)
   Power window main switch
   Connector	Terminal
   D5	13	Ground	12

Is the inspection result normal?

YES 

Replace power window main switch. Refer to REMOVAL AND INSTALLATION .

NO 

GO TO STEP 3  .

1. Disconnect BCM connector and power window main switch connector.
2. Check continuity between BCM harness connector and power window main switch harness connector.

   BCM		Power window main switch		Continuity
   Connector	Terminal	Connector	Terminal
   M68	8	D5	13	Existed

3. Check continuity between BCM harness connector and ground.

   BCM		Ground	Continuity
   Connector	Terminal
   M68	8		Not existed

Is the inspection result normal?

YES 

Replace BCM. Refer to REMOVAL AND INSTALLATION .

NO 

Repair or replace harness.

Refer to INTERMITTENT INCIDENT .

INSPECTION END