Diagnostic Test

With CONSULT

Perform self-diagnosis for "ALL MODE AWD/4WD". Refer to CONSULT FUNCTION .

Is DTC detected?

YES 

Check the DTC. Refer to DTC INDEX .

NO 

GO TO STEP 2  .

With CONSULT

1. Erase self-diagnosis result for "ABS".
2. Turn the ignition switch OFF, and wait 10 seconds or more.
3. Start the engine and drive the vehicle for a short period of time.
   NOTE:

   Vehicle must be driven after repair or replacement to erase the previous DTCs.

4. Stop the vehicle.
5. Perform self-diagnosis for "ABS".

Is DTC "C1118" detected?

YES 

Replace the ABS actuator and electric unit (control unit). Refer to REMOVAL AND INSTALLATION .

NO 

Check pin terminals and connection of each harness connector for abnormal conditions. Repair / replace harness, connector, or terminal.