Component Parts And Function
| Component | Function |
|---|---|
| Pump | Operates the pump drive according to signals from ABS actuator and electric unit (control unit) by the motor. |
| Motor | Operates the motor drive according to signals from ABS actuator and electric unit (control unit). |
| Accumulator | The accumulator accumulates brake fluid conveyed by the motor and pump. |
| ABS IN valve | Increases, holds or decreases the fluid pressure of each caliper according to signals from ABS actuator and electric unit (control unit). |
| ABS OUT valve | Increases, holds or decreases the fluid pressure of each caliper according to signals from ABS actuator and electric unit (control unit). |
| Cut valve 1 Cut valve 2 |
Shuts off the ordinary brake line from master cylinder to signals from ABS actuator and electric unit (control unit). |
| Suction valve 1 | Suction Valve 1 switches the brake line to convey accumulator pressure to the front system, according to a signal transmitted from the ABS actuator and electric unit (control unit). |
| Suction valve 2 | Suction valve 2 releases accumulator pressure, according to a signal transmitted from the ABS actuator and electric unit (control unit). |
| Control pressure sensor* | Detects the brake fluid pressure of rear brake caliper and transmits a signal to ABS actuator and electric unit (control unit). |
| Accumulator pressure sensor | The accumulator pressure sensor detects brake fluid pressure accumulated in the accumulator and conveys the detected result to the ABS actuator and electric unit (control unit). |
| Master cylinder pressure sensor | Detects the brake fluid pressure of master cylinder part and transmits a signal to ABS actuator and electric unit (control unit). |
* : Models with Advanced Driver Assistance System