Diagnostic Test
- CHECK BRAKE WARNING LAMP FUNCTION (1)
Check that brake warning lamp in combination meter turns ON for approx. 1 second after ignition switch is turned ON.
CAUTION:Never start engine.
Is the inspection result normal?
YES
GO TO STEP 2 .
NO
Proceed to diagnosis procedure. Refer to DIAGNOSIS PROCEDURE .
- CHECK BRAKE WARNING LAMP FUNCTION (2)
Check that brake warning lamp in combination meter turns ON/OFF when parking brake is operated.
NOTE:Brake warning lamp turns ON when parking brake is operated (when parking brake switch is ON).
Is the inspection result normal?
YES
GO TO STEP 3 .
NO
Check parking brake switch system. Refer to DIAGNOSIS PROCEDURE .
- CHECK BRAKE WARNING LAMP FUNCTION (3)
Check that brake warning lamp in combination meter turns ON/OFF when brake fluid level switch is operated while brake fluid level in reservoir tank is with the specified level.
NOTE:Brake warning lamp turns ON when brake fluid is less than the specified level (when brake fluid level switch is ON).
Is the inspection result normal?
YES
INSPECTION END
NO
Check brake fluid level switch system. Refer to DIAGNOSIS PROCEDURE .