LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2017 >> QX80 Base, AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System (With VDC) >> System Description >> System >> Fail-Safe >> EBD Function
April 5, 2026: LEMON Manuals is launched! Read the announcement.

EBD Function

ABS warning lamp, brake warning lamp and VDC warning lamp in combination meter turn ON when a malfunction occurs in system [ABS actuator and electric unit (control unit)]. The control is suspended for VDC function, TCS function, ABS function, EBD function, hill start assist function, brake limited slip differential (BLSD) function and trailer sway control function. The vehicle status becomes the same as models without VDC function, TCS function, ABS function, EBD function, hill start assist function, brake limited slip differential (BLSD) function and trailer sway control function.

DTC Malfunction detected condition Fail-safe condition
C1101 When an open circuit is detected in rear RH wheel sensor circuit. The following functions are suspended.
  • VDC function
  • TCS function
  • ABS function
  • EBD function (only when both 2 rear wheels are malfunctioning)
  • hill start assist function
  • Brake limited slip differential (BLSD) function
  • Trailer sway control function
C1102 When an open circuit is detected in rear LH wheel sensor circuit.
C1103 When an open circuit is detected in front RH wheel sensor circuit.
C1104 When an open circuit is detected in front LH wheel sensor circuit.
C1105
  • When power supply voltage of rear RH wheel sensor is low.
  • When distance between rear RH wheel sensor and rear RH wheel sensor rotor is large.
  • When installation of rear RH wheel sensor or rear RH wheel sensor rotor is not normal.
C1106
  • When power supply voltage of rear LH wheel sensor is low.
  • When distance between rear LH wheel sensor and rear LH wheel sensor rotor is large.
  • When installation of rear LH wheel sensor or rear LH wheel sensor rotor is not normal.
C1107
  • When power supply voltage of front RH wheel sensor is low.
  • When distance between front RH wheel sensor and front RH wheel sensor rotor is large.
  • When installation of front RH wheel sensor or front RH wheel sensor rotor is not normal.
C1108
  • When power supply voltage of front LH wheel sensor is low.
  • When distance between front LH wheel sensor and front LH wheel sensor rotor is large.
  • When installation of front LH wheel sensor or front LH wheel sensor rotor is not normal.
C1109
  • When ignition voltage is 10 V or less.
  • When ignition voltage is 16 V or more.
 The following functions are suspended.
  • VDC function
  • TCS function
  • ABS function
  • EBD function
  • hill start assist function
  • Brake limited slip differential (BLSD) function
  • Trailer sway control function
C1111
  • When a malfunction is detected in motor or motor relay.
  • When a low pressure malfunction is detected in accumulator.
  • When a malfunction is detected in accumulator pressure sensor.
C1115 When difference in wheel speed between any wheel and others is detected during the vehicle is driven, because of installation of other tires than specified. The following functions are suspended.
  • VDC function
  • TCS function
  • ABS function
  • hill start assist function
  • Brake limited slip differential (BLSD) function
  • Trailer sway control function
C1116
  • When stop lamp switch signal is not input when brake pedal depress.
  • When stop lamp switch signal is not input when stop lamp relay operates.
C1118* 1 When a malfunction is detected in transfer control unit system.
C1120 When a malfunction is detected in front LH ABS IN valve. The following functions are suspended.
  • VDC function
  • TCS function
  • ABS function
  • EBD function
  • hill start assist function
  • Brake limited slip differential (BLSD) function
  • Trailer sway control function
C1121 When a malfunction is detected in front LH ABS OUT valve.
C1122 When a malfunction is detected in front RH ABS IN valve.
C1123 When a malfunction is detected in front RH ABS OUT valve.
C1124 When a malfunction is detected in rear LH ABS IN valve.
C1125 When a malfunction is detected in rear LH ABS OUT valve.
C1126 When a malfunction is detected in rear RH ABS IN valve.
C1127 When a malfunction is detected in rear RH ABS OUT valve.
C1130 When a malfunction is detected in ECM system. The following functions are suspended.
  • VDC function
  • TCS function
  • hill start assist function
  • Brake limited slip differential (BLSD) function
  • Trailer sway control function
C1140 When a malfunction is detected in actuator relay. The following functions are suspended.
  • VDC function
  • TCS function
  • ABS function
  • EBD function
  • hill start assist function
  • Brake limited slip differential (BLSD) function
  • Trailer sway control function
C1142* 2 When a malfunction is detected in master cylinder pressure sensor or control pressure sensor. The following functions are suspended.
  • VDC function
  • TCS function
  • hill start assist function
  • Brake limited slip differential (BLSD) function
  • Trailer sway control function
C1143 When a malfunction is detected in steering angle sensor.
C1144 When neutral position adjustment of steering angle sensor is not complete.
C1145
  • When a malfunction is detected in yaw rate signal.
  • When yaw rate signal is not continuously received for 2 seconds or more.
  • When side G signal is not continuously received for 2 seconds or more.
  • When decel G signal is not continuously received for 2 seconds or more.
 The following functions are suspended.
  • VDC function
  • TCS function
  • ABS function
  • hill start assist function
  • Brake limited slip differential (BLSD) function
  • Trailer sway control function
C1146 When a malfunction is detected in side/decel G signal.
C1155
  • When brake fluid level low signal is detected.
  • When an open circuit is detected in brake fluid level switch circuit.
C1160 When calibration of yaw rate/side/decal G sensor is not complete.
C1164 When a malfunction is detected in cut valve 1. The following functions are suspended.
  • VDC function
  • TCS function
  • ABS function
  • EBD function
  • hill start assist function
  • Brake limited slip differential (BLSD) function
  • Trailer sway control function
C1165 When a malfunction is detected in cut valve 2.
C1166 When a malfunction is detected in suction valve 1.
C1167 When a malfunction is detected in suction valve 2.
C1170 When the information in ABS actuator and electric unit (control unit) is not the same. The following functions are suspended.
  • VDC function
  • TCS function
  • ABS function
  • hill start assist function
  • Brake limited slip differential (BLSD) function
  • Trailer sway control function
C118E When performing excessive brake pedal operation with the vehicle stopped. [When accumulator fluid pressure reaches 11.43 MPa (114 bar, 116.6 kg/cm2 , 1657 psi) after reaching 17.3 MPa (173 bar, 176.5 kg/cm2 , 2509 psi.] The following functions are suspended.
  • VDC function
  • TCS function
  • ABS function
  • EBD function
  • hill start assist function
  • Brake limited slip differential (BLSD) function
  • Trailer sway control function
U1000 When CAN communication signal is not continuously received for 2 seconds or more. The following functions are suspended.
  • VDC function
  • TCS function
  • ABS function
  • hill start assist function
  • Brake limited slip differential (BLSD) function
  • Trailer sway control function

* 1: Models with 4WD System

* 2: Models with Advanced Driver Assistance System

scientia non olet · About LEMON Manuals