Configuration (ADAS Control Unit): Description
WARNING: This page is about a different car, the 2016 Infiniti QX80. However, it is still accessible from the selected car via links, so may be relevant.
- Since vehicle specifications are not included in the ADAS control unit after replacement, it is required to write vehicle specifications with CONSULT. Refer to WORK PROCEDURE .
- Configuration has three functions as follows.
Function Description Read/Write Configuration Before Replace ECU Allows the reading of vehicle specification written in ADAS control unit to store the specification in CONSULT. After Replace ECU Allows the writing of the vehicle information stored in CONSULT into the ADAS control unit. Manual Configuration Allows the writing of the vehicle specification into the ADAS control unit by hand.