Active Pedal
WARNING: This page is about a different car, the 2016 Infiniti QX80. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- Shift the selector lever to "P" position, and then perform the test.
- Never depress the accelerator pedal excessively. (The engine speed may rise unexpectedly when finishing the test.)
NOTE:
- Depress the accelerator pedal to check when performing the test.
- The test can be performed only when the engine is running.
| Test item | Operation | Description | Accelerator pedal operation |
|---|---|---|---|
| ACTIVE PEDAL | MODE1 | Transmit the accelerator pedal feedback force control signal to the accelerator pedal actuator via ITS communication. | Constant with a force of 25 N for 8 seconds |
| MODE2 | Constant with a force of 15 N for 8 seconds | ||
| MODE3 | Change up to a force of 25 N for 8 seconds | ||
| MODE4 | Change up to a force of 15 N for 8 seconds | ||
| Test start | Starts the tests of "MODE1", "MODE2", "MODE3" and "MODE4" | - | |
| Reset | Stops transmitting the accelerator pedal feedback force control signal below to end the test. | - | |
| End | Returns to the "SELECT TEST ITEM" screen | - |
NOTE:
The test is finished in 10 seconds after starting