Diagnosis Procedure
WARNING: This page is about a different car, the 2016 Infiniti QX50. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK ENGINE START FUNCTION
- Perform the check for DTC except DTC P1610.
- Use CONSULT to erase DTC after fixing.
- Turn ignition switch OFF.
- Turn ignition switch ON when registered Intelligent Key insert into key slot and wait for 5 seconds.
- Return the ignition switch OFF and wait 5 seconds.
- Repeat steps 4 and 5 twice (total of 3 cycles).
- Check that engine can start when registered Intelligent Key insert into key slot.
INSPECTION END