LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2017 >> QX80 Base, RWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Cruise Control System (ICC) (Introduction) >> System Description >> Operation >> Vehicle-To-Vehicle Distance Control Mode Function >> Switch Name And Function
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Switch Name And Function

G07024203Courtesy of NISSAN NORTH AMERICA, INC.
No. Switch name Description
WHITE-1 CANCEL switch Deactivates the system without erasing the set speed
WHITE-2 RESUME/ACCELERATE switch Resumes set speed or increases speed incrementally
  • Push and hold the switch to increase the set speed by 5 km/h (5 MPH)
  • Push then quickly release the switch to increase the set speed by 1 km/h (1 MPH)
WHITE-3 SET/COAST switch Sets desired cruise speed or reduces speed incrementally
  • Push and hold the switch to decrease the set speed by 5 km/h (5 MPH)
  • Push then quickly release the switch to decrease the set speed by 1 km/h (1 MPH)
NOTE:

The minimum set speed is 32 km/h (20 MPH)

WHITE-4 MAIN switch Master switch to activate the system (Press for less than 1.5 seconds)
WHITE-5 DISTANCE switch Changes the following distance from: Long, Middle, Short