LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2017 >> QX80 Base, RWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Driver Assistance System (ADAS Control Unit) (Introduction, Wiring Diagrams And Basic Inspection) >> System Description >> Diagnosis System (ADAS Control Unit) >> On Board Diagnosis Function >> Method Of Starting
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Method Of Starting

CAUTION:

Start condition of on board self-diagnosis

  • ICC system OFF
  • DCA system OFF
  • Vehicle speed 0 km/h (0 MPH)
  1. Turn the ignition switch OFF.
  2. Start the engine.
  3. Wait for 5 seconds after starting the engine. Push up the RESUME/ACCELERATE switch 5 times and push down the SET/COAST switch 5 times within 10 seconds.
    G04142878Courtesy of NISSAN NORTH AMERICA, INC.
    NOTE:

    If the above operation cannot be performed within 10 seconds after waiting for 5 seconds after starting the engine, repeat the procedure from step 1.

  4. The DTC is displayed on the set vehicle speed indicator WHITE-1 on the ICC system display on the information display when the on board self-diagnosis starts. Refer to DTC INDEX .
    G09161864Courtesy of NISSAN NORTH AMERICA, INC.
    NOTE:
    • It displays for up to 5 minutes and then stops.
    • If multiple malfunctions exist, up to 6 DTCs can be stored in memory at the most, and the most recent one is displayed first.