Data Monitor
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.
| Monitored item [Unit] |
Description | |
|---|---|---|
| CAMERA HIGH TEMP | (NORMAL/HIGH) | Displays status of lane camera unit high temperature judgment. |
| WIPER | (Off/Lo/Hi) | Displays the wiper operating status. |
| TURN SIGNAL | (Off/LH/ RH/LH&RH) | Displays status of "Turn signal" received from BCM via CAN communication. |
| VEHICLE SPEED | (km/h) | Displays vehicle speed received from ABS actuator and electric unit (control unit) via CAN communication. |
| DRIVER ASSIST SYSTEM SET | (NO REQ) |
NOTE:
The item is indicated, but not monitored. |
| BRAKE OPERATION STATUS | (Off/On/CNFRM/UNKWN) | Displays the brake operating status. |
| AIMING DONE | (not finished/finished) | Displays status that camera aiming is done. |
| AIMING RESULT | (NOK/OK) | Displays result of camera aiming. |
| STEERING ANGLE | (deg) | Displays the steering angle sent from the steering angle sensor. |
| YAW RATE | (deg/s) | Displays the yaw rate. |
| FCTRY AIM YAW | (deg) | Displays the yaw angle result of camera aiming. |
| FCTRY AIM ROL | (deg) | Displays the roll angle result of camera aiming. |
| FCTRY AIM PIT | (deg) | Displays the pitch angle result of camera aiming. |
| Camera yaw | (deg) | Displays the yaw angle result of camera aiming after automatic adjustment. |
| LDW FUNCTION | (NORMAL/MALF) | Displays LDW function status. |
| LDW SETTING DISPLAY | (NTHNG) |
NOTE:
The item is indicated, but not monitored. |
| DRIVER ASSIST SYSTEM BZZR | (NTHNG) |
NOTE:
The item is indicated, but not monitored. |
| Runtime aiming | (not finished/finished) | Displays the result of automatic adjustment. |
| Camera pitch | (deg) | Displays the pitch angle result of camera aiming after automatic adjustment. |
| LDW LEFT | (Off/On) | Displays the deviating status on the LH side lane. |
| LDW RIGHT | (Off/On) | Displays the deviating status on the RH side lane. |
| LDW STATUS DISPLAY | (Off/ON/TMP MF/ MF) |
NOTE:
The item is indicated, but not monitored. |
| AHL status | (AHL failure/Normal/unavailable) | Displays the status of high beam assist. |
| HBA FUNCTION |
NOTE:
The item is indicated, but not monitored. |
|
| LOW BEAM STATUS | (Off) |
NOTE:
The item is indicated, but not monitored. |
| HIGH BEAM STATUS | (Off) |
NOTE:
The item is indicated, but not monitored. |
| DISTANCE | (m) | Displays the distance between the vehicle and an object detected by the lane camera unit. |
| RELATIVE SPEED | (m/s) | Displays the relative velocity to an object detected by the lane camera unit. |
| Distance (Cruise) | (m) | Displays the distance between the vehicle and an object detected by the lane camera unit. |
| Relative speed (Cruise) | (m/s) | Displays the relative velocity to an object detected by the lane camera unit. |