Diagnosis Procedure
- CHECK CONTINUITY COMPOSITE IMAGE SIGNAL CIRCUIT
- Turn ignition switch OFF.
- Disconnect video distributor connector and headrest display unit connector.
- Check continuity between video distributor harness connector and headrest display unit harness connector.
Video distributor Headrest display unit Continuity Connector Terminal Connector Terminal M217 32 B554* 1 24 Existed 28 B574* 2 24 Existed * 1: Headrest display unit LH
* 2: Headrest display unit RH
- Check continuity between headrest display unit harness connector and ground.
Headrest display unit Ground Continuity Connector Terminal B554* 1 24 Not existed B574* 2 24 * 1: Headrest display unit LH
* 2: Headrest display unit RH
Is the inspection result normal?
YES
GO TO STEP 2 .
NO
Repair harness or connector.
- CHECK COMPOSITE IMAGE SIGNAL
- Connect video distributor connector and rear display unit connector.
- Turn ignition switch ON.
- Check signal between rear display unit harness connector using an oscilloscope.
(+) (-) Condition Reference value Headrest display unit Connector Terminal B554* 1 24 Ground When DVD, USB or front AUX image is displayed on headrest display unit LH or RH. B574* 2 24 * 1: Headrest display unit LH
* 2: Headrest display unit RH
Is the inspection result normal?
YES
Replace headrest display unit. Refer to EXPLODED VIEW WITH TORQUE SPECIFICATIONS .
NO
Replace video distributor. Refer to REMOVAL AND INSTALLATION .