Method Of Starting
- Turn ignition switch to the ON position.
- Turn the headrest display unit OFF.
- Select "L" and press each switch of rear seat remote controller in the order shown below (within 20 seconds after ignition switch is turned ON).
: L position 1. 2. (VOL DOWN)
3. SETUP 4. (VOL UP)
5. 6. POWER NOTE:Perform the operation of rear seat remote controller for headrest display unit of each side.
- When the rear seat remote operation is performed as shown on procedure 3, self-diagnosis screen is displayed.NOTE:
Self - diagnosis mode is canceled when pressing the enter switch of rear seat remote controller.