Data Monitor

NOTE:

The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.

Monitored item [Unit]	ALL SIG	ALL SIG (ICC)	MAIN SIG (ICC)	MAIN SIG (LDW/LDP)	MAIN SIG (BSW/BSI)	MAIN SIG (BCI)	Description
MAIN SW [On/Off]	*	*	*	*	*		Indicates [On/Off] status as judged from ICC steering switch (ECM transmits ICC steering switch signal through CAN communication)
SET/COAST SW [On/Off]	*	*	*				Indicates [On/Off] status as judged from ICC steering switch (ECM transmits ICC steering switch signal through CAN communication)
CANCEL SW [On/Off]	*	*	*				Indicates [On/Off] status as judged from ICC steering switch (ECM transmits ICC steering switch signal through CAN communication)
RESUME/ACC SW [On/Off]	*	*	*				Indicates [On/Off] status as judged from ICC steering switch (ECM transmits ICC steering switch signal through CAN communication)
DISTANCE SW [On/Off]	*	*					Indicates [On/Off] status as judged from ICC steering switch (ECM transmits ICC steering switch signal through CAN communication)
CRUISE OPE [On/Off]	*	*	*				Indicates whether controlling or not (ON means "controlling")
BRAKE SW [On/Off]	*	*	*	*	*	*	Indicates [On/Off] status as judged from ICC brake switch signal (ECM transmits ICC brake switch signal through CAN communication)
STOP LAMP SW [On/Off]	*	*	*	*	*	*	Indicates [On/Off] status as judged from stop lamp switch signal (ECM transmits stop lamp switch signal through CAN communication)
IDLE SW [On/Off]	*	*				*	Indicates [On/Off] status of idle switch read from ADAS control unit through CAN communication (ECM transmits On/Off status through CAN communication)
SET DISTANCE [Short/Mid/Long]	*	*	*				Indicates set distance memorized in ADAS control unit
CRUISE LAMP [On/Off]	*	*	*				Indicates [On/Off] status of MAIN switch indicator output
OWN VHCL [On/Off]	*	*					Indicates [On/Off] status of own vehicle indicator output
VHCL AHEAD [On/Off]	*	*					Indicates [On/Off] status of vehicle ahead detection indicator output
ICC WARNING [On/Off]	*	*					Indicates [On/Off] status of ICC system warning lamp output
VHCL SPEED SE [km/h] or [mph]	*	*	*	*	*	*	Indicates vehicle speed calculated from ADAS control unit through CAN communication [ABS actuator and electric unit (control unit) transmits vehicle speed signal (wheel speed) through CAN communication]
SET VHCL SPD [km/h] or [mph]	*	*	*				Indicates set vehicle speed memorized in ADAS control unit
BUZZER O/P [On/Off]	*	*				*	Indicates [On/Off] status of ICC warning chime output
THRTL SENSOR [deg]	*	*	*				NOTE: The item is displayed, but it is not monitored
ENGINE RPM [rpm]	*	*					Indicates engine speed read from ADAS control unit through CAN communication (ECM transmits engine speed signal through CAN communication)
WIPER SW [OFF/LOW/HIGH]	*	*					Indicates wiper [OFF/LOW/HIGH] status (BCM transmits front wiper request signal through CAN communication)
YAW RATE [deg/s]	*	*					NOTE: The item is displayed, but it is not monitored
BA WARNING [On/Off]	*	*					Indicates [On/Off] status of FEB indicator lamp output
RELEASE SW NO [On/Off]	*	*		*	*	*	NOTE: The item is displayed, but it is not monitored
RELEASE SW NC [On/Off]	*	*		*	*	*	NOTE: The item is displayed, but it is not monitored
STP LMP DRIVE [On/Off]	*	*	*			*	Indicates [On/Off] status of ICC brake hold relay drive output
PRESS SENS [bar]	*	*	*				NOTE: The item is displayed, but it is not monitored
D RANGE SW [On/Off]	*	*					Indicates [On/Off] status of "D" or "M" positions read from ADAS control unit through CAN communication; ON when position "D" or "M" (TCM transmits shift position signal through CAN communication).
NP RANGE SW [On/Off]	*	*					Indicates shift position signal read from ADAS control unit through CAN communication (TCM transmits shift position signal through CAN communication)
PKB SW [On/Off]	*	*					Parking brake switch status [On/Off] judged from the parking brake switch signal that ADAS control unit readout via CAN communication is displayed (combination meter transmits the parking brake switch signal via CAN communication)
PWR SUP MONI [V]	*	*	*				Indicates IGN voltage input by ADAS control unit
VHCL SPD AT [km/h] or [mph]	*	*					Indicates vehicle speed calculated from A/T vehicle speed sensor read from ADAS control unit through CAN communication (TCM transmits A/T vehicle speed sensor signal through CAN communication)
THRTL OPENING [%]	*	*	*			*	Indicates throttle position read from ADAS control unit through CAN communication (ECM transmits accelerator pedal position signal through CAN communication).
GEAR [1, 2, 3, 4, 5, 6, 7]	*	*					Indicates A/T gear position read from ADAS control unit through CAN communication (TCM transmits current gear position signal through CAN communication)
MODE SIG [OFF, ICC, ASCD]	*	*					Indicates the active mode from ICC or ASCD [conventional (fixed speed) cruise control mode]
SET DISP IND [On/Off]	*	*					Indicates [On/Off] status of SET switch indicator output
DISTANCE [m]	*	*					Indicates the distance from the vehicle ahead
RELATIVE SPD [m/s]	*	*					Indicates the relative speed of the vehicle ahead
DYNA ASIST SW [On/Off]	*	*	*		*		Indicates [On/Off] status as judged from ICC steering switch signal (ECM transmits ICC steering switch signal through CAN communication)
DCA ON IND [On/Off]	*	*					The status [ON/OFF] of DCA system switch indicator output is displayed
DCA VHL AHED [On/Off]	*	*					The status [ON/OFF] of vehicle ahead detection indicator output in DCA system is displayed
APA TEMP [°C]	*	*				*	Accelerator pedal actuator integrated motor temperature that the ADAS control unit readout via ITS communication is displayed (Accelerator pedal actuator transmits the integrated motor temperature via ITS communication)
FCW MAIN SW							NOTE: The item is displayed, but it is not monitored
APA PWR [V]	*	*				*	Accelerator pedal actuator power supply voltage that the ADAS control unit readout via ITS communication is displayed (Accelerator pedal actuator transmits the power supply voltage via ITS communication)
NAVI-ICC DISP [On/Off]	*	*					NOTE: The item is displayed, but it is not monitored
LDW SYSTEM ON [On/Off]	*			*			Indicates [On/Off] status of LDW system
LANE DPRT W/L [On/Off]	*			*			Indicates [On/Off] status of LDW/LDP warning display (Yellow) output
LDW BUZER OUTPUT [On/Off]	*			*			Indicates [On/Off] status of warning buzzer output
LDP SYSTEM ON [On/Off]	*			*			Indicates [On/Off] status of LDP system
WARN REQ [On/Off]	*			*			Indicates an ADAS control unit judged warning state (ON/OFF) of LDP system
READY signal [On/Off]	*			*			Indicates LDP system settings
Camera lost [Detect/Deviate/Both]	*			*	*		Indicates a lane marker detection state judged from a lane marker detection signal read by the ADAS control unit via ITS communication (Lane camera unit transmits a lane marker signal via ITS communication)
Lane unclear [On/Off]	*			*	*		Indicates an ON/OFF state of the lane marker. The ON/OFF state is judged from a detected lane condition signal read by the ADAS control unit via ITS communication (The lane camera unit transmits a detected lane condition signal via ITS communication)
STATUS signal [Stnby/Warn/Cancl/Off]	*			*			Indicates a control state of LDP system
Shift position [Off, P, R, N, D, M/T1 - 7]	*			*	*	*	Indicates shift position read from ADAS control unit through CAN communication (TCM transmits shift position signal through CAN communication)
Turn signal [OFF/LH/RH/LH&RH]	*			*	*		Indicates turn signal operation status read from ADAS control unit through CAN communication (BCM transmits turn indicator signal through CAN communication)
SIDE G [G]	*			*	*		Indicates lateral G acting on the vehicle. This lateral G is judged from a side G sensor signal read by ADAS control unit via CAN communication (The ABS actuator and electric unit (control unit) transmits a side G sensor signal via CAN communication)
FUNC ITEM (FCW) [On/Off]	*	*	*	*	*		Indicates systems which can be set to ON/OFF by selecting "Driver Assistance Warning"→"Forward Emergency Braking" of the navigation screen
FUNC ITEM (LDW) [On/Off]	*	*	*	*	*		Indicates systems which can be set to ON/OFF by selecting "Driver Assistance Warning"→"Lane Departure Warning" of the navigation screen
FUNC ITEM (BSW) [On/Off]	*	*	*	*	*		Indicates systems which can be set to ON/OFF by selecting "Driver Assistance Warning"→"Blind Spot Warning" of the navigation screen
FUNC ITEM (NV-ICC) [Off]	*	*	*	*	*		NOTE: The item is displayed, but it is not monitored
FUNC ITEM (NV-DCA) [Off]	*	*	*	*	*		NOTE: The item is displayed, but it is not monitored
DCA SELECT [On/Off]	*	*	*	*	*		Indicates an ON/OFF state of the DCA system. The DCA system can be set to ON/OFF by selecting "Dynamic Assistance Setting"→"Distance Control Assist" of the navigation screen
LDP SELECT [On/Off]	*	*	*	*	*		Indicates an ON/OFF state of the LDP system. The LDP system can be set to ON/OFF by selecting "Dynamic Assistance Setting"→"Lane Departure Prevention" of the navigation screen
BSI SELECT [On/Off]	*	*	*	*	*		Indicates an ON/OFF state of the Blind Spot Intervention system. The Blind Spot Intervention system can be set to ON/OFF by selecting "Dynamic Assistance Setting"→"Blind Spot Intervention" of the navigation screen
FCW SELECT [On/Off]	*	*	*	*	*		Indicates an ON/OFF state of the PFCW system. The PFCW system can be set to ON/OFF by selecting "Driver Assistance Warning"→"Forward Emergency Braking" of the navigation screen
LDW SELECT [On/Off]	*	*	*	*	*		Indicates an ON/OFF state of the LDW system. The LDW system can be set to ON/OFF by selecting "Driver Assistance Warning"→"Lane Departure Warning" of the navigation screen
BSW SELECT [On/Off]	*	*	*	*	*		Indicates an ON/OFF state of the BSW system. The BSW system can be set to ON/OFF by selecting "Driver Assistance Warning"→"Blind Spot Warning" of the navigation screen
NAVI ICC SELECT [Off]	*	*	*	*	*		NOTE: The item is displayed, but it is not monitored
NAVI DCA SELECT [Off]	*	*	*	*	*		NOTE: The item is displayed, but it is not monitored
DRIVE MODE STATS [STD/SPORT/ECO/SNOW/MID/ERROR]	*	*	*	*	*		NOTE: The item is displayed, but it is not monitored
4WD SWITCH [AUTO/4H/4L]	*	*	*	*	*		Indicates [On/Off] status as judged from current 4WD mode signal (Transfer control unit transmits current 4WD mode signal through CAN communication)
BSW/BSI WARN LMP [On/Off]	*				*		Indicates [On/Off] status of Blind Spot warning malfunction
BSI ON IND [On/Off]	*				*		Indicates [On/Off] status of Blind Spot Intervention system display
BSW SYSTEM ON [On/Off]	*				*		Indicates [On/Off] status of BSW system
BSI SYSTEM ON [On/Off]	*				*		Indicates [On/Off] status of Blind Spot Intervention system
FCW SYSTEM ON [On/Off]	*	*	*				Indicates [On/Off] status of PFCW system
BCI SYSTEM ON [On/Off]	*					*	Indicates [On/Off] status of BCI system
BCI SWITCH [On/Off]	*					*	Indicates [On/Off] status of BCI switch
BATTERY CIRCUIT OFF [On/Off]	*						NOTE: The item is displayed, but it is not used
LDP WARNING INDICATOR [On/Off]	*			*			Indicates [On/Off] status of LDP warning display (Yellow) output
LDW ON INDICATOR [On/Off]	*			*			Indicates [On/Off] status of LDW system ON display output
LDW WARNING INDICATOR [On/Off]	*			*			Indicates [On/Off] status of LDW system warning display output
SYSTEM CANCEL MESSAGE [NOREQ/SLIP/SNOW/VDC OFF]	*	*	*	*	*		Indicates status of system cancel display output
CAMERA HI TEMP MSG [On/Off]	*			*	*		Indicates [On/Off] status of lane camera unit high temperature warning display output
ITS SETTING ITEM(DCA) [On/Off]	*	*	*	*	*		Indicates the presence or absence of DCA system.
ITS SETTING ITEM(LDP) [On/Off]	*	*	*	*	*		Indicates the presence or absence of LDP system.
ITS SETTING ITEM(BSI) [On/Off]	*	*	*	*	*		Indicates the presence or absence of Blind Spot Intervention system.
BSI WARNING INDICATOR [On/Off]	*				*		Indicates [On/Off] status of Blind Spot Intervention warning display output
BSW ON INDICATOR [On/Off]	*				*		Indicates [On/Off] status of BSW system ON display output
SIDE RADAR BLOCK COND [On/Off]	*				*		Indicates [On/Off] status of side radar with dirt or foreign materials
LDW WARNING ALERT TIMING [Nothing/Early/Late]	*			*			NOTE: The item is displayed, but it is not monitored
BSW IND BRIGHTNESS [Nothing/Bright/Normal/Dark]	*				*		Indicates status of brightness of Blind Spot Warning/Blind Spot Intervention indicator
SL MAIN SW [On/Off]	*		*				Indicates [On/Off] status as judged from steering switch
PMAS SW [On/Off]	*						NOTE: The item is displayed, but it is not monitored
PMAS IND [On/Off]	*						NOTE: The item is displayed, but it is not monitored
FUNC ITEM(FEB) [On/Off]	*						Indicates systems which can be set to ON/OFF by selecting "Driver Assistance Warning"→"Forward Emergency Braking" of the navigation screen
FEB SELECT [On/Off]	*						Indicates an ON/OFF state of the FEB system. The FEB system can be set to ON/OFF by selecting "Driver Assistance Warning"→"Forward Emergency Braking" of the navigation screen
FEB SW [On/Off]	*						Indicates [On/Off] status of FEB system
G SENSOR SIGNAL [On/Off]	*						NOTE: The item is displayed, but it is not used
PMAS BUZZER REQ 1 [On/Off]	*						NOTE: The item is displayed, but it is not used
PMAS BUZZER REQ 2 [On/Off]	*						NOTE: The item is displayed, but it is not used
PMAS BUZZER REQ 3 [On/Off]	*						NOTE: The item is displayed, but it is not used
SL TARGET VEHICLE SPEED [km/h]	*	*					Indicates set vehicle speed memorized in ADAS control unit
SL SET LAMP [On/Off]	*	*					Indicates [On/Off] status of speed limiter SET display output
SL LIMIT LAMP [On/Off]	*	*					Indicates [On/Off] status of speed limiter MAIN switch display output
ASCD CANCEL (LOW SPEED) [NON/CUT]	*	*					Indicates the vehicle cruise condition. NON: Vehicle speed is maintained at the ASCD set speed. CUT: Vehicle speed decreased to excessively low, and ASCD operation is cut off.
ASCD CANCEL (SPEED DIFF) [NON/CUT]	*	*					Indicates the vehicle cruise condition. NON: Vehicle speed is maintained at the ASCD set speed. CUT: Vehicle speed decreased to excessively low compared with the ASCD set speed, and ASCD operation is cut off.
KICK DOWN [On/Off]	*	*					Display Kick Down decision state. On: Accelerator pedal is depressed Off: Accelerator pedal is fully released