DTC Detection Logic

NOTE:

If DTC B2602 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to DTC LOGIC .
If DTC B2602 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to DTC LOGIC .

DTC No.	Trouble diagnosis name	DTC detecting condition	Possible cause
B2602	SHIFT POSITION	BCM detects the following status for 10 seconds. Selector lever is in the P position Vehicle speed is 4 km/h (2.5 MPH) or more Ignition switch is in the ON position	Harness or connectors (CAN communication line is open or shorted.) Harness or connectors [A/T shift selector (detention switch) circuit is open or shorted.] A/T shift selector (detention switch) Combination meter BCM