Data Monitor
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.
: Applicable
| Item (Unit) | Monitor item selection | Note | |
|---|---|---|---|
| INPUT SIGNALS | MAIN ITEMS | ||
| FR LH SENSOR [km/h (MPH)] |
* | * | Wheel speed calculated by front LH wheel sensor is displayed. |
| FR RH SENSOR [km/h (MPH)] |
* | * | Wheel speed calculated by front RH wheel sensor is displayed. |
| RR LH SENSOR [km/h (MPH)] |
* | * | Wheel speed calculated by rear LH wheel sensor is displayed. |
| RR RH SENSOR [km/h (MPH)] |
* | * | Wheel speed calculated by rear RH wheel sensor is displayed. |
| DECEL G - SEN (G) |
* | * | Decel G detected by decel G sensor is displayed. |
| FR RH IN SOL (On/Off) |
* | Operation status of front RH wheel ABS IN valve is displayed. | |
| FR RH OUT SOL (On/Off) |
* | Operation status of front RH wheel ABS OUT valve is displayed. | |
| FR LH IN SOL (On/Off) |
* | Operation status of front LH wheel ABS IN valve is displayed. | |
| FR LH OUT SOL (On/Off) |
* | Operation status of front LH wheel ABS OUT valve is displayed. | |
| RR RH IN SOL (On/Off) |
* | Operation status of rear RH wheel ABS IN valve is displayed | |
| RR RH OUT SOL (On/Off) |
* | Operation status of rear RH wheel ABS OUT valve is displayed. | |
| RR LH IN SOL (On/Off) |
* | Operation status of rear LH wheel ABS IN valve is displayed. | |
| RR LH OUT SOL (On/Off) |
* | Operation status of rear LH wheel ABS OUT valve is displayed. | |
| EBD WARN LAMP (On/Off) |
Brake warning lamp ON/OFF status is displayed. (Note 1) | ||
| STOP LAMP SW (On/Off) |
* | * | Stop lamp switch signal input status is displayed. |
| MOTOR RELAY (On/Off) |
* | ABS motor and motor relay status is displayed. | |
| ACTUATOR RLY (On/Off) |
* | ABS actuator relay status is displayed. | |
| ABS WARN LAMP (On/Off) |
* | ABS warning lamp ON/OFF status is displayed. (Note 1) | |
| OFF LAMP (On/Off) |
* | VDC OFF indicator lamp ON/OFF status is displayed.(Note 1) | |
| OFF SW (On/Off) |
* | * | VDC OFF switch signal input status is displayed. |
| SLIP/VDC LAMP (On/Off) |
* | VDC warning lamp ON/OFF status is displayed.(Note 1) | |
| BATTERY VOLT (V) |
* | * | Voltage supplied to ABS actuator and electric unit (control unit) is displayed. |
| GEAR | * | * | Current gear position judged from current gear position signal is displayed. |
| ENGINE SPEED (tr/min) |
* | * | Engine speed status is displayed. |
| YAW RATE SEN (d/s) |
* | * | Yaw rate detected by yaw rate sensor is displayed. |
| R POSI SIG (On/Off) |
R range signal input status judged from R range signal is displayed. | ||
| 4WD MODE MON (AUTO/LOCK/##) |
* | * | 4WD control status is displayed. |
| N POSI SIG (On/Off) |
N range signal input status judged from N range signal is displayed. | ||
| CV1 (On/Off) |
Cut valve 1 operation status is displayed. | ||
| CV2 (On/Off) |
Cut valve 2 operation status is displayed. | ||
| SV1 (On/Off) |
Suction valve 1 operation status is displayed. | ||
| SV2 (On/Off) |
Suction valve 2 operation status is displayed. | ||
| STOP LAMP SW2 (On/Off) |
Stop lamp switch signal input status is displayed. | ||
| ACCEL POS SIG (%) |
* | Displays the Accelerator pedal position | |
| SIDE G - SENSOR (m/s2 ) |
* | Side G detected by side G sensor is displayed. | |
| STR ANGLE SIG (°) |
* | Steering angle detected by steering angle sensor is displayed. | |
| PRESS SENSOR (bar) |
* | Detects the brake fluid pressure of master cylinder part is displayed. | |
| ACCUM PRESS SEN (bar) |
Detects the brake fluid pressure of accumulator is displayed. | ||
| CONT PRESS SEN (bar) |
Detects the brake fluid pressure of control pressure sensor is displayed | ||
| EBD SIGNAL (On/Off) |
EBD operation status is displayed. | ||
| ABS SIGNAL (On/Off) |
ABS operation status is displayed. | ||
| TCS SIGNAL (On/Off) |
TCS operation status is displayed. | ||
| VDC SIGNAL (On/Off) |
VDC operation status is displayed. | ||
| EBD FAIL SIG (On/Off) |
EBD fail-safe signal status is displayed. | ||
| ABS FAIL SIG (On/Off) |
ABS fail-safe signal status is displayed. | ||
| TCS FAIL SIG (On/Off) |
TCS fail-safe signal status is displayed. | ||
| VDC FAIL SIG (On/Off) |
VDC fail-safe signal status is displayed. | ||
| CRANKING SIG (On/Off) |
Cranking status is displayed. | ||
| FLUID LEV SW (On/Off) |
* | Brake fluid level signal input status via CAN communication is displayed. | |
| PARK BRAKE SW (On/Off) |
* | Parking brake switch signal input status via CAN communication is displayed. | |
| STP ON RLY (On/Off) |
Stop lamp switch relay status is displayed. | ||
| USS SIG(Note 2) (On/Off) |
hill start assist operation status is displayed. | ||
Note 1: Refer to SYSTEM DESCRIPTION for ON/OFF conditions of each warning lamp and indicator lamp.
Note 2: USS means "hill start assist"