DTC Detection Logic

NOTE:

If DTC P0019 is displayed with DTC P0084 or P1084 first perform trouble diagnosis for DTC P0084 or P1084. Refer to DTC LOGIC (P0084) or DTC LOGIC (P1084).

DTC No.	Trouble diagnosis name (Trouble diagnosis content)	Detecting condition	Possible cause
P0019	Crankshaft position B2 sensor B (Crankshaft position - camshaft position correlation bank 2 sensor B)	During the diagnosis of alignment of exhaust valve timing control, the angle difference between actual angle and target angle is 13 degrees or more.	Crankshaft position sensor Camshaft position sensor Exhaust valve timing control position sensor Exhaust valve timing control solenoid valve Accumulation of debris to the signal pick-up portion of the camshaft Timing chain installation Foreign matter caught in the oil groove for exhaust valve timing control