Component Inspection (EOP Sensor)

1. Turn ignition switch OFF.
2. Disconnect EOP sensor harness connector.
3. Check resistance between EOP sensor connector terminals.

   +	-	Condition	Resistance (kΩ)
   EOP sensor
   Terminal
   1	2	None	4 kΩ- 10 kΩ
   	3		2 kΩ- 8 kΩ
   2	1		4 kΩ- 10 kΩ
   	3		1 kΩ- 3 kΩ
   3	1		2 kΩ- 8 kΩ
   	2		1 kΩ- 3 kΩ

Is the inspection result normal?

YES 

INSPECTION END.

NO 

Replace EOP sensor. Refer to EXPLODED VIEW WITH TORQUE SPECIFICATIONS .