Work Procedure
- CHECK DTC
Check DTC.
Is any DTC detected?
YES
Repair malfunction(s) and erase DTC. Refer to DTC Index .
NO
GO TO 2 .
- CHECK SRT STATUS
WITH CONSULT
Select "SRT Status" of "SRT & P-DTC" with CONSULT.
Is SRT code(s) set?
YES
GO TO 6 .
NO
GO TO 3 .
- PERFORM ROAD TEST
- Perform the most efficient SRT set driving pattern to set the SRT properly. Refer to SRT Set Driving Pattern .
In order to set all SRTs, the SRT set driving pattern must be performed at least once.
GO TO 4 .
- Perform the most efficient SRT set driving pattern to set the SRT properly. Refer to SRT Set Driving Pattern .
- CHECK DTC
Check DTC.
Is any DTC detected?
YES
Repair malfunction(s) and erase DTC. Refer to DTC Index . and GO TO 3 .
NO
GO TO 5 .
- CHECK SRT STATUS
Select "SRT STATUS" with CONSULT.
Is SRT(s) set?
YES
GO TO 6 .
NO
Call TECH LINE or take appropriate action.
- CHECK PERMANENT DTC NOTE: Permanent DTC cannot be checked with a tool other than CONSULT.
Select "Permanent DTC Status" of "SRT & P-DTC" with CONSULT.
Is permanent DTC(s) detected?
YES
Go to Description .
NO
END