Input Signal And Output Signal (For 2.0L Turbo Gasoline Engine Models)

WARNING: This page is about a different car, the 2019 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.

Major signal transmission between each unit via communication lines is shown in the following table.

Component

Signal description

ECM

Mainly transmits the following signals to ABS actuator and electric unit (control unit) via CAN communication.

Accelerator pedal position signal
Engine torque signal
Engine speed signal
Current gear position signal
Shift position signal
Stop/start status signal
Engine torque request signal

Mainly receives the following signals from ABS actuator and electric unit (control unit) via CAN communication.

Engine torque request signal

Combination meter

Mainly transmits the following signals to ABS actuator and electric unit (control unit) via CAN communication.

Brake fluid level switch signal
Parking brake switch signal

Mainly receives the following signals from ABS actuator and electric unit (control unit) via CAN communication.

VDC warning lamp signal
VDC OFF indicator lamp signal