LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2018 >> Q60 Pure, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Infotainment >> Audio, Visual & Navigation System (INFINITI INTOUCH) >> Basic Inspection >> Configuration (Display Control Unit) >> Work Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Work Procedure

  1. WRITING MODE SELECTION 

    SYMBOL CONSULT Configuration

    Select "Re/programming, Configuration" of "MULTI AV".

    When writing saved data

    GO TO 2.

    When writing manually

    GO TO 3.

  2. WRITING VEHICLE SPECIFICATION 

    SYMBOL CONSULT Configuration

    Select "Configuration" or "After Replace ECU", and write the vehicle specification saved in CONSULT to display control unit.

    CAUTION: Do not perform any operation such as the navigation operation during configuration writing.

    GO TO 4.

  3. WRITE VEHICLE SPECIFICATION 

    SYMBOL CONSULT Configuration

    Select "Manual Configuration", and write the setting value as shown in the following table to display control unit according to the vehicle specification.

    CAUTION: Grasp vehicle specifications precisely. The control of ECU may not function normally if the specifications are misread.
    NOTE:
    • The items shown in this list depend on vehicle specifications.
    • The config list may not be displayed depending on vehicle specifications. This is not a malfunction.
    • If selection items are not displayed on the CONSULT screen, touch "NEXT".

    MANUAL SETTING ITEM

    Detail

    Items

    Setting value

    NAVIGATION

    WITH

    Models with navigation

    WITHOUT

    Models without navigation

    ENGINE TYPE

    VQ ENGINE

    VQ engine models

    EXCEPT FOR VQ ENGINE

    Except for VQ engine models

    ENGINE TYPE

    GASOLINE

    Gasoline engine models

    HYBRID

    Hybrid models

    HYBRID

    OFF

    Except hybrid models

    FR TYPE

    Hybrid models (2WD)

    FR TYPE 4WD

    Hybrid models (4WD)

    CAMERA SYSTEM

    REAR CAMERA

    With rear view monitor system

    NONE/AVM

    With around view monitor system

    SONAR TYPE

    NONE

    Models without sonar

    FRONT&REAR

    Models with sonar

    AUDIO AMP TYPE

    160W AMP

    Models without BOSE system

    2ch AMP

    Models with BOSE system

    LDP (LANE DEPARTURE PREVENTION)

    On

    Models with LDP

    Off

    Models without LDP

    PREDICTIVE COURSE LINE

    WITHOUT/WITH AVM

    With around view monitor system

    WITH (RVM WITHOUT DAST)

    With rear view monitor system without direct adaptive steering

    WITH (RVM WITH DAST)

    With rear view monitor system and direct adaptive steering

    DESTINATION

    U.S.A

    For U.S.A

    Canada

    For Canada

    Mexico

    For Mexico

    GRADE

    MODE1

    Except VR30DDTT engine (2WD) with paddle shifter models

    MODE2

    VR30DDTT engine (2WD) with paddle shifter models

    GO TO 5.

  4. PERFORM SELF-DIAGNOSIS 

    SYMBOL CONSULT Self Diagnostic Result

    Perform self-diagnosis of CONSULT, and check whether or not DTC U1223 is detected.

    Is DTC U1223 detected?

    YES

    GO TO 3.

    NO

    GO TO 5.

  5. OPERATION CHECK 

    Check that the operation of the display control unit and camera images (fixed guide lines and predictive course lines) are normal.

    WORK END