LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2018 >> Q60 Pure, AWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Seats >> Automatic Drive Positioner >> System Description >> Diagnosis System (Driver Seat Control Unit) >> CONSULT Function >> Data Monitor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Data Monitor

NOTE: The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.

Monitor Item

Unit

Main

Signals

Selection From Menu

Contents

SET SW

"On/Off"

x

x

ON/OFF status judged from the setting switch signal.

MEMORY SW 1

"On/Off"

x

x

ON/OFF status judged from the seat memory switch 1 signal.

MEMORY SW 2

"On/Off"

x

x

ON/OFF status judged from the seat memory switch 2 signal.

SLIDE SW-FR

"On/Off"

x

x

ON/OFF status judged from the sliding switch (forward) signal.

SLIDE SW-RR

"On/Off"

x

x

ON/OFF status judged from the sliding switch (backward) signal.

RECLN SW-FR

"On/Off"

x

x

ON/OFF status judged from the reclining switch (forward) signal.

RECLN SW-RR

"On/Off"

x

x

ON/OFF status judged from the reclining switch (backward) signal.

LIFT FR SW-UP

"On/Off"

x

x

ON/OFF status judged from the lifting switch front (up) signal.

LIFT FR SW-DN

"On/Off"

x

x

ON/OFF status judged from the lifting switch front (down) signal.

LIFT RR SW-UP

"On/Off"

x

x

ON/OFF status judged from the lifting switch rear (up) signal.

LIFT RR SW-DN

"On/Off"

x

x

ON/OFF status judged from the lifting switch rear (down) signal.

MIR CON SW-UP

"On/Off"

x

x

ON/OFF status judged from the mirror switch (up) signal.

MIR CON SW-DN

"On/Off"

x

x

ON/OFF status judged from the mirror switch (down) signal.

MIR CON SW-RH

"On/Off"

x

x

ON/OFF status judged from the door mirror remote control switch (passenger side) signal.

MIR CON SW-LH

"On/Off"

x

x

ON/OFF status judged from the door mirror remote control switch (driver side) signal.

MIR CHNG SW-R

"On/Off"

x

x

ON/OFF status judged from the door mirror remote control switch (switching to right) signal.

MIR CHNG SW-L

"On/Off"

x

x

ON/OFF status judged from the door mirror remote control switch (switching to left) signal.

TILT SW-UP

"On/Off"

x

x

ON/OFF status judged from the tilt switch (up) signal.

TILT SW-DOWN

"On/Off"

x

x

ON/OFF status judged from the tilt switch (down) signal.

TELESCO SW-FR

"On/Off"

x

x

ON/OFF status judged from the telescoping switch (forward) signal.

TELESCO SW-RR

"On/Off"

x

x

ON/OFF status judged from the telescoping switch (backward) signal.

DETENT SW

"On/Off"

x

x

The selector lever position "OFF (P position) / ON (other than P position)" judged from the detention switch signal.

STARTER SW

"On/Off"

x

x

Ignition key switch ON (START, ON) /OFF (ACC, OFF) status judged from the ignition switch signal.

SLIDE PULSE

--

-

x

Value (32768) when battery connections are standard. If it moves backward, the value increases. If it moves forward, the value decreases.

RECLN PULSE

--

-

x

Value (32768) when battery connections are standard. If it moves backward, the value increases. If it moves forward, the value decreases.

LIFT FR PULSE

--

-

x

Value (32768) when battery connections are standard. If it moves DOWN, the value increases. If it moves UP, the value decreases.

LIFT RR PULSE

--

-

x

Value (32768) when battery connections are standard. If it moves DOWN, the value increases. If it moves UP, the value decreases.

MIR/SEN RH U-D

"V"

-

x

Voltage input from door mirror sensor (passenger side) up/down is displayed.

MIR/SEN RH R-L

"V"

-

x

Voltage input from door mirror sensor (passenger side) left/right is displayed.

MIR/SEN LH U-D

"V"

-

x

Voltage input from door mirror sensor (driver side) up/down is displayed.

MIR/SEN LH R-L

"V"

-

x

Voltage input from door mirror sensor (driver side) left/right is displayed.

TILT PULSE

--

-

x

Value (32768) when battery connections are standard. If it moves DOWN, the value increases. If it moves UP, the value decreases.

TELESCO PULSE

--

-

x

Value (32768) when battery connections are standard. If it moves backward, the value increases. If it moves forward, the value decreases.

VEHICLE SPEED

--

x

x

Display the vehicle speed signal received from combination meter by numerical value [km/h].

P RANG SW CAN

"On/Off"

x

x

ON/OFF status judged from the P range switch signal.

R RANGE (CAN)

"On/Off"

x

x

ON/OFF status judged from the R range switch signal.

DOOR SW-FL

"On/Off"

x

x

ON/OFF status judged from the door switch (front driver side) signal.

DOOR SW-FR

"On/Off"

x

x

ON/OFF status judged from the door switch (front passenger side) signal.

IGN ON SW

"On/Off"

x

x

ON/OFF status judged from the ignition switch signal.

ACC ON SW

"On/Off"

x

x

ON/OFF status judged from the ACC switch signal.

KEY ON SW

"On/Off"

x

x

ON/OFF status judged from the key on switch signal.

KEYLESS ID

--

x

x

Key ID status judged from the key ID signal.

KYLS DR UNLK

"On/Off"

x

x

ON/OFF status judged from the driver side door unlock actuator output switch signal.

VHCL SPEED (ABS)

"On/Off"

x

x

ON/OFF status judged from vehicle speed signal.

HANDLE

"LHD"

x

x

RHD/LHD status judged from handle position signal.

TRANSMISSION

"AT/MT"

x

x

AT/MT status judged from transmission.

STEERING STATUS

"LOCK/UNLOCK"

x

x

LOCK/UNLOCK status judged from steering lock unit.

INITIAL STATE

DONE/YET

x

x

Displays the default status of the log-in function.

USER1 REGIST

DONE/YET

x

x

Displays the USER1 registration or non-registration status of the log-in function.

USER2 REGIST

DONE/YET

x

x

Displays the USER2 registration or non-registration status of the log-in function.

USER3 REGIST

DONE/YET

x

x

Displays the USER3 registration or non-registration status of the log-in function.

USER4 REGIST

DONE/YET

x

x

Displays the USER4 registration or non-registration status of the log-in function.

LOGIN USER

USER1/USER2/USER3/USER4

x

x

Displays the current log-in user with the log-in function.

USER1 SW

On/Off

x

x

ON/OFF status judged from user1 change switch signal.

USER2 SW

On/Off

x

x

ON/OFF status judged from user2 change switch signal.

USER3 SW

On/Off

x

x

ON/OFF status judged from user3 change switch signal.

USER4 SW

On/Off

x

x

ON/OFF status judged from user4 change switch signal.

LOGIN USER CHANGE

PRBT/PRMT

x

x

Display the user change permission or inhibition status of the log-in function.

KEY LINK FUNCTION

On/Off

x

x

Displays the ON/OFF status of the Intelligent Key interlock function.

KEY NUMBER

"KEY 1/KEY 2/KEY 3/KEY 4"

--

--

NOTE: This item is displayed, but cannot be monitored

KEY 1

"NO REG/ACT/INACT"

--

--

NOTE: This item is displayed, but cannot be monitored

KEY 2

"NO REG/ACT/INACT"

--

--

NOTE: This item is displayed, but cannot be monitored

KEY 3

"NO REG/ACT/INACT"

--

--

NOTE: This item is displayed, but cannot be monitored

KEY 4

"NO REG/ACT/INACT"

--

--

NOTE: This item is displayed, but cannot be monitored

Log-in user setting 1

"Off/User1/User2/User3/User4"

x

x

The user number that is used for transmitting the settings of the log-in function is displayed.

Log-in user setting 2

"Off/User1/User2/User3/User4"

x

x

The user number that is used for receiving the settings of the log-in function is displayed.

Log-in user setting copy status

"On/Off"

x

x

The copy status of the Log-in function is displayed with "On/Off".