LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2018 >> Q60 Pure, AWD >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System (DTC/Circuit Diagnosis) (2.0L) (1 Of 4) >> DTC/Circuit Diagnosis >> DTC U0103: Drivetrain Can Communication (Selector Lever Module) >> Component Inspection (Resistor 1 and 2)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Inspection (Resistor 1 and 2)

  1. CHECK RESISTOR 1 AND 2 
    1. Turn ignition switch OFF.
    2. Disconnect resistor harness connectors. (For parts location, refer to Component Parts Location .)
    3. Check resistance between resistor terminals.

      Resistor

      Terminals

      Resistance

      1

      1 and 2

      120 Ohm

      2

    Is the inspection result normal?

    YES

    INSPECTION END

    NO

    Replace the malfunctioning resistor.

scientia non olet · About LEMON Manuals