LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2018 >> Q60 Pure, AWD >> Repair and Diagnosis (Single Page) >> Engine Performance >> Testing & Diagnosis >> Engine Control System (DTC/Circuit Diagnosis) (2.0L) (4 Of 4) >> DTC/Circuit Diagnosis >> Stop/Start Off Switch >> Component Function Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Function Check

  1. CHECK STOP/START OFF SWITCH FUNCTION 

    SYMBOL With CONSULT

    1. Turn ignition switch ON.
    2. Select "AT STOP START SW" in "DATA MONITOR" mode of "EMCM" using CONSULT.
    3. Check "AT STOP START SW" indication as per the following condition.

      Monitor item

      Condition

      Indication

      AT STOP START SW

      Press the stop/start OFF switch. (Stop/Start system is ON.)

      On

      Press the stop/start OFF switch again. (Stop/Start system is OFF.)

      Off

    Is the inspection result normal?

    YES

    INSPECTION END

    NO

    Proceed to Diagnosis Procedure .

scientia non olet · About LEMON Manuals