How To Set
With CONSULT
Perform "AIR INLET CHANGE SETTING" in "WORK SUPPORT" mode of "HVAC" using CONSULT.
|
Work support items |
Display |
Setting |
|
AIR INLET CHANGE SETTING |
Prohibition |
Intake switch cannot be change during stop/start operation. |
|
Permission (Initial status) |
Intake switch can be change during stop/start operation. |
NOTE:
When the battery cable is disconnected from the negative terminal or when the battery voltage becomes 10 V or less, the setting of the air inlet change control setting during the stop/start system operation may be cancelled.