DTC Confirmation Procedure
- CHECK SELF-DIAG RESULT
With CONSULT
- Turn ignition switch ON.
- Perform "Self Diagnostic Result" mode of "AIR BAG" using CONSULT.
Without CONSULT
- Turn ignition switch ON.
- Check the air bag warning lamp status. Refer to On Board Diagnosis Function .
NOTE: SRS does not enter the diagnosis mode if no malfunction is detected in the user mode.Is malfunctioning part detected?
YES
Refer to Diagnosis Procedure .
NO
To check malfunction symptom before repair: Refer to Intermittent Incident .
NO
Confirmation after repair: INSPECTION END