Stop/Start Operation Permission Condition Evaluated By TCM
When TCM detects the vehicle status and stop/start system operation OK is determined, stop/start enable signal is sent to ECM through CAN communication.
|
Item |
Description |
Permission conditions |
|
Transmission range switch |
Selector lever position |
|
|
G sensor |
Gradient |
+/- 14% |
|
CVT fluid temperature sensor |
CVT fluid temperature |
21 - 107 deg.C (69.8 - 224.6 deg.F) |
|
Electric oil pump |
Malfunction |
Normal |
|
Interval time |
5 seconds or more from cancellation of previous stop/start system operation |
|
|
High and low reverse clutch pressure |
Control oil pressure |
129.3 kPa or more |