Work Procedure
- WRITING MODE SELECTION
CONSULT Configuration
Select "Re/programming, Configuration" of "MULTI AV".
When writing saved data
GO TO 2.
When writing manually
GO TO 3.
- WRITING VEHICLE SPECIFICATION
CONSULT Configuration
Select "Configuration" or "After Replace ECU", and write the vehicle specification saved in CONSULT to display control unit.
CAUTION: Do not perform any operation such as the navigation operation during configuration writing.GO TO 4.
- WRITE VEHICLE SPECIFICATION
CONSULT Configuration
Select "Manual Configuration", and write the setting value as shown in the following table to display control unit according to the vehicle specification.
CAUTION: Grasp vehicle specifications precisely. The control of ECU may not function normally if the specifications are misread.NOTE:- The items shown in this list depend on vehicle specifications.
- The config list may not be displayed depending on vehicle specifications. This is not a malfunction.
- If selection items are not displayed on the CONSULT screen, touch "NEXT".
MANUAL SETTING ITEM
Detail
Items
Setting value
NAVIGATION
WITH
Models with navigation
WITHOUT
Models without navigation
ENGINE TYPE
VQ ENGINE
VQ engine models
EXCEPT FOR VQ ENGINE
Except for VQ engine models
ENGINE TYPE
GASOLINE
Gasoline engine models
HYBRID
Hybrid models
HYBRID
OFF
Except hybrid models
FR TYPE
Hybrid models (2WD)
FR TYPE 4WD
Hybrid models (4WD)
CAMERA SYSTEM
REAR CAMERA
With rear view monitor system
NONE/AVM
With around view monitor system
SONAR TYPE
NONE
Models without sonar
FRONT&REAR
Models with sonar
AUDIO AMP TYPE
160W AMP
Models without BOSE system
2ch AMP
Models with BOSE system
LDP (LANE DEPARTURE PREVENTION)
On
Models with LDP
Off
Models without LDP
PREDICTIVE COURSE LINE
WITHOUT/WITH AVM
With around view monitor system
WITH (RVM WITHOUT DAST)
With rear view monitor system without direct adaptive steering
WITH (RVM WITH DAST)
With rear view monitor system and direct adaptive steering
DESTINATION
U.S.A
For U.S.A
Canada
For Canada
Mexico
For Mexico
GRADE
MODE1
Except VR30DDTT engine (2WD) with paddle shifter models
MODE2
VR30DDTT engine (2WD) with paddle shifter models
GO TO 5.
- PERFORM SELF-DIAGNOSIS
CONSULT Self Diagnostic Result
Perform self-diagnosis of CONSULT, and check whether or not DTC U1223 is detected.
Is DTC U1223 detected?
YES
GO TO 3.
NO
GO TO 5.
- OPERATION CHECK
Check that the operation of the display control unit and camera images (fixed guide lines and predictive course lines) are normal.
WORK END