Fail Safe List
x:Applicable --: Not applicable
|
DTC No. |
Detected items |
Vehicle behavior |
||||||||
|
Pattern |
Others |
|||||||||
|
A |
B |
C |
D |
E |
F |
G |
||||
|
U012E U042F |
Engine communication |
-- |
-- |
-- |
x |
x |
-- |
-- |
ECM stops the electric valve timing control. (The camshaft returns to the position of most retard angle.) |
|
|
-- |
-- |
-- |
x |
-- |
x |
-- |
||||
|
P0010 P0020 |
Electric intake valve timing control module |
-- |
-- |
-- |
x |
x |
-- |
-- |
ECM stops the electric valve timing control. (The camshaft returns to the position of most retard angle.) |
|
|
-- |
-- |
-- |
x |
-- |
x |
-- |
||||
|
P0011 P0012 P0021 |
Intake valve timing control |
-- |
-- |
-- |
x |
-- |
-- |
-- |
ECM stops the electric valve timing control. (The camshaft returns to the position of most retard angle.)
NOTE:
When VTC mechanism sticks, camshaft position does not change from position of stuck angle.
|
|
|
P0016 |
-- |
-- |
-- |
-- |
-- |
-- |
-- |
|||
|
P0014 P0015 P0017 P0024 |
Exhaust valve timing control |
-- |
-- |
-- |
x |
-- |
-- |
-- |
-- |
|
|
P0046 P004B |
Electric wastegate actuator motor |
-- |
x |
-- |
x |
-- |
-- |
-- |
ECM stops the electric wastegate actuator control. (Wastegate valve opens) |
|
|
P0078 P0084 |
Exhaust valve timing control solenoid valve |
-- |
-- |
-- |
x |
-- |
-- |
-- |
-- |
|
|
P0087 P0088 |
Fuel rail pressure control |
x |
-- |
-- |
x |
x |
-- |
-- |
-- |
|
|
x |
-- |
-- |
-- |
x |
-- |
-- |
||||
|
P0090 |
High pressure fuel pump |
x |
-- |
-- |
x |
x |
-- |
-- |
-- |
|
|
P0101 P010B |
Mass air flow sensor |
x |
-- |
-- |
-- |
x |
-- |
-- |
-- |
|
|
-- |
x |
-- |
x |
-- |
-- |
x |
-- |
|||
|
P0102 P0103 P010C P010D |
-- |
x |
-- |
x |
-- |
-- |
x |
-- |
||
|
P0117 P0118 |
Engine coolant temperature sensor |
-- |
-- |
-- |
-- |
-- |
x |
-- |
-- |
|
|
P0122 P0123 P0222 P0223 P0227 P0228 P1239 P2132 P2133 P2135 |
Throttle position sensor |
-- |
-- |
-- |
x |
-- |
-- |
-- |
The ECM controls the electric throttle control actuator in regulating the throttle opening in order for the idle position to be within +10 degrees. The ECM regulates the opening speed of the throttle valve to be slower than the normal condition. So, the acceleration will be poor. |
|
|
P0171 P0172 P0174 P0175 |
Fuel injection system |
x |
-- |
-- |
-- |
-- |
x |
-- |
-- |
|
|
P0190 |
Fuel rail pressure sensor |
x |
-- |
-- |
x |
-- |
x |
-- |
-- |
|
|
P0191 P0192 P0193 |
x |
-- |
-- |
-- |
x |
-- |
-- |
-- |
||
|
P0197 P0198 |
Engine oil temperature sensor |
-- |
-- |
-- |
-- |
-- |
-- |
-- |
Exhaust valve timing control does not function. |
|
|
P0201 P0202 P0203 P0204 P0205 P0206 |
Fuel injector |
x |
-- |
-- |
-- |
x |
-- |
-- |
-- |
|
|
P0234 P1334 |
Turbocharger system |
-- |
x |
-- |
x |
-- |
-- |
-- |
-- |
|
|
P0235 P0237 P0238 P0241 P0242 |
Turbocharger boost sensor |
-- |
x |
-- |
x |
-- |
-- |
-- |
-- |
|
|
P0300 P0301 P0302 P0303 P0304 P0305 P0306 |
Misfire |
x |
-- |
-- |
-- |
-- |
x |
-- |
-- |
|
|
P0335 |
Crankshaft position sensor |
-- |
-- |
-- |
x |
x |
-- |
-- |
-- |
|
|
-- |
-- |
-- |
x |
-- |
x |
-- |
||||
|
P0340 P0345 |
Intake camshaft position sensor |
-- |
-- |
-- |
x |
x |
-- |
-- |
-- |
|
|
-- |
-- |
-- |
x |
-- |
x |
-- |
||||
|
P1140 P1145 |
x |
-- |
-- |
x |
-- |
-- |
x |
-- |
||
|
P0365 P0390 |
Exhaust camshaft position sensor |
-- |
-- |
-- |
x |
-- |
-- |
-- |
-- |
|
|
P0500 |
Vehicle speed sensor |
x |
-- |
-- |
-- |
-- |
x |
-- |
-- |
|
|
P0524 |
Engine oil pressure |
-- |
-- |
-- |
-- |
-- |
-- |
-- |
|
|
|
P0603 P0607 |
ECM |
-- |
-- |
-- |
-- |
-- |
-- |
-- |
-- |
|
|
-- |
x |
-- |
-- |
-- |
-- |
-- |
ASCD operation may be deactivated. |
|||
|
P0604 |
-- |
-- |
-- |
x |
-- |
-- |
-- |
ECM stops the electric throttle control actuator control, throttle valve is maintained at a fixed opening (approx. 5 degrees) by the return spring. |
||
|
P0605 |
-- |
-- |
-- |
-- |
-- |
-- |
-- |
-- |
||
|
-- |
-- |
-- |
x |
-- |
-- |
-- |
ECM stops the electric throttle control actuator control, throttle valve is maintained at a fixed opening (approx. 5 degrees) by the return spring. |
|||
|
P0606 |
-- |
-- |
-- |
-- |
-- |
-- |
-- |
-- |
||
|
-- |
-- |
-- |
x |
-- |
-- |
-- |
ECM stops the electric throttle control actuator control, throttle valve is maintained at a fixed opening (approx. 5 degrees) by the return spring. |
|||
|
P060A |
-- |
-- |
-- |
x |
-- |
-- |
-- |
ECM stops the electric throttle control actuator control, throttle valve is maintained at a fixed opening (approx. 5 degrees) by the return spring. |
||
|
-- |
x |
-- |
x |
-- |
-- |
-- |
|
|||
|
P060B |
-- |
-- |
-- |
x |
-- |
-- |
-- |
ECM stops the electric throttle control actuator control, throttle valve is maintained at a fixed opening (approx. 5 degrees) by the return spring. |
||
|
P062B |
-- |
-- |
-- |
-- |
-- |
-- |
-- |
-- |
||
|
x |
-- |
-- |
-- |
x |
-- |
-- |
||||
|
P0641 |
Sensor power supply |
-- |
-- |
-- |
x |
x |
-- |
-- |
ECM stops the electric valve timing control. (The camshaft returns to the position of most retard angle.) |
|
|
-- |
-- |
-- |
x |
-- |
x |
-- |
||||
|
P0643 |
-- |
-- |
-- |
x |
-- |
-- |
-- |
-- |
||
|
P14A4 P14A5 P14AD P14AE |
Charge air cooler cooling electric water pump |
-- |
-- |
-- |
-- |
-- |
-- |
-- |
Charge air cooler cooling electric water pump runs at the command speed. |
|
|
P14A7 P14B0 |
-- |
-- |
-- |
-- |
-- |
-- |
-- |
Charge air cooler cooling electric water pump runs at full speed. |
||
|
P14A9 P14AA P14AC P14B2 P14B3 P14B5 |
-- |
-- |
-- |
-- |
-- |
-- |
-- |
Charge air cooler cooling electric water pump stops. |
||
|
P1197 |
Out of gas |
-- |
-- |
-- |
x |
-- |
-- |
-- |
-- |
|
|
P119A P119B P119C |
Fuel pressure sensor |
x |
-- |
-- |
-- |
x |
-- |
-- |
-- |
|
|
P1233 P2101 |
Electric throttle control |
-- |
-- |
-- |
x |
-- |
-- |
-- |
ECM stops the electric throttle control actuator control, throttle valve is maintained at a fixed opening (approx. 5 degrees) by the return spring. |
|
|
P1236 P2118 |
Throttle control motor |
-- |
-- |
-- |
x |
-- |
-- |
-- |
ECM stops the electric throttle control actuator control, throttle valve is maintained at a fixed opening (approx. 5 degrees) by the return spring. |
|
|
P1238 P2119 |
Electric throttle control actuator |
-- |
x |
-- |
-- |
-- |
-- |
-- |
-- |
|
|
-- |
-- |
-- |
x |
-- |
-- |
-- |
ECM stops the electric throttle control actuator control, throttle valve is maintained at a fixed opening (approx. 5 degrees) by the return spring. |
|||
|
P1290 P2100 P2103 |
Throttle control motor relay |
-- |
-- |
-- |
x |
-- |
-- |
-- |
ECM stops the electric throttle control actuator control, throttle valve is maintained at a fixed opening (approx. 5 degrees) by the return spring. |
|
|
P1805 |
Brake switch |
-- |
-- |
-- |
-- |
-- |
-- |
-- |
ECM controls the electric throttle control actuator by regulating the throttle opening to a small range. Therefore, acceleration will be poor. |
|
|
Vehicle condition |
Driving condition |
|||||||||
|
When engine is idling |
Normal |
|||||||||
|
When accelerating |
Poor acceleration |
|||||||||
|
P2122 P2123 P2127 P2128 P2138 |
Accelerator pedal position sensor |
-- |
-- |
-- |
x |
-- |
-- |
-- |
-- |
|
|
P23E9 P23EA P2614 P2615 |
Intake camshaft position sensor |
-- |
-- |
-- |
x |
x |
-- |
-- |
ECM stops the electric valve timing control. (The camshaft returns to the position of most retard angle.) |
|
|
-- |
-- |
-- |
x |
-- |
x |
-- |
||||
|
P23EB P2616 P2617 P2618 |
-- |
-- |
-- |
x |
x |
-- |
-- |
|||
|
P2619 |
-- |
-- |
-- |
x |
-- |
x |
-- |
|||
|
P2562 P2566 P2586 P2590 |
Electric wastegate control valve position sensor |
-- |
x |
-- |
x |
-- |
-- |
-- |
ECM stops the electric wastegate actuator control. (Wastegate valve opens) |
|
|
P2563 P2564 P2565 P2587 P2588 P2589 |
-- |
|||||||||
|
P2578 P2593 |
Turbocharger speed sensor |
-- |
-- |
-- |
-- |
-- |
-- |
-- |
Torque have to be limited to the operating range that does not generate the over speed of the turbocharger. |
|
|
P25DF P25E8 P34A4 P34A5 P34A6 P34A7 P34A8 P34A9 P34AA P34AB P34AC P34AD P34B0 P34B1 |
Electric intake valve timing control actuator |
-- |
-- |
-- |
x |
x |
-- |
-- |
ECM stops the electric valve timing control. (The camshaft returns to the position of most retard angle.)
NOTE:
Normal bank transitions intermediate F/S valve timing.
|
|
|
P34C4 P34C5 |
Electric intake valve timing control actuator |
-- |
-- |
-- |
x |
x |
-- |
-- |
ECM stops the electric valve timing control. (The camshaft returns to the position of most retard angle.) |
|
|
P34C8 |
Electric intake valve timing control module |
-- |
-- |
-- |
x |
x |
-- |
-- |
ECM stops the electric valve timing control. (The camshaft returns to the position of most retard angle.) |
|
|
-- |
-- |
-- |
x |
-- |
x |
-- |
||||