DTC Description
DTC DETECTION LOGIC
|
DTC |
Display item (Trouble diagnosis content) |
Malfunction detected condition |
|
C13DE-00 |
TEMPERATURE SENSOR (Temperature sensor) |
Control module detects that the internal temperature in steering force motor is in following state for 1 seconds or more.
|
POSSIBLE CAUSE
- Force motor temperature sensor (included in force motor angle sensor)
- Sensor circuit (between steering force control module and force motor angle sensor) is open or short.
- Steering force control module
Fail-Safe
- Protection modeNOTE: For details of protection functions, refer to Protection Function .
DTC CONFIRMATION PROCEDURE
- PRECONDITIONING
If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.
GO TO 2.
- DTC REPRODUCTION PROCEDURE
With CONSULT
- Start the engine.CAUTION: Never drive the vehicle.
- Turn the steering wheel.
- Perform self-diagnosis for "EPS/DAST 3".
Is DTC "C13DE-00" detected?
YES
Proceed to diagnosis procedure. Refer to Diagnosis Procedure .
NO
To check malfunction symptom before repair: Refer to Intermittent Incident .
NO
Confirmation after repair: INSPECTION END
- Start the engine.