Data Monitor Mode

NOTE: The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.

Monitored Item

For reference values of the following items, refer to Reference Value .

Monitored item	Unit	Description	Remarks
ALT DUTY	%	The item is displayed but is not used.
BAT TEMP SEN	V	The signal voltage from the main battery temperature sensor is displayed.
ENG RESTART B/R STK CNT	--	Indicates a count for engine restart bypass relay function diagnosis.
BAT CUR SEN	mV	The signal voltage of main battery current sensor is displayed.
CML B/DCHG CRNT	--	Cumulative main battery discharge current is displayed.
LOAD SIGNAL	On/Off	Indicates [ON/OFF] condition of the electrical lode signal. ON: Rear window defogger switch is ON and/or lighting switch is 2nd position. OFF: Both rear window defogger switch and lighting switch are OFF.
HEATER FAN SW	On/Off	Indicates [ON/OFF] condition from the heater fan switch signal.
BRAKE SW2	On/Off	Indicates [ON/OFF] condition of stop lamp switch signal.
BATTERY STS	OK/NG	Indicated [OK/NG] condition of main battery output.	EMCM judges whether stop/start system is possible according to main battery state.
AT STOP START SW	On/Off	Displays the activation status of stop/start system.
ALT DUTY SIG	On/Off	The control condition of the power generation voltage variable control (determined by EMCM according to the input signals) is indicated. ON: Power generation voltage variable control is active. OFF: Power generation voltage variable control is inactive.
BATTERY VOLT	V	Indicates power supply voltage for EMCM.
SUB-BATTERY TEMP SENSOR	V	Indicates a signal voltage of sub battery temperature sensor.
SUB-BATTERY VOLTAGE	V	Indicates sub battery power supply voltage.
CMLTV S/BAT DISCHG CRNT	--	Indicates sub-battery discharge current cumulative value.
SUB-BAT CURRENT SEN V	mV	Indicates a signal voltage of the sub battery current sensor.
C/DYNAMOMETER MODE	On/Off	Indicates the chassis dynamometer mode status.
BRAKE PEDAL POSITION SW	On/Off	Indicates [ON/OFF] condition from the brake pedal position switch signal.
SUB-BATTERY STATUS	OK/NG	Indicates [OK/NG] condition of sub battery output.	EMCM judges whether stop/start system is possible according to battery state.