LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2018 >> QX30 Base >> Repair and Diagnosis >> Brakes >> Brakes Control Systems >> Brake Control System >> Ecu Diagnosis Information >> Electronic Stability Program Control Unit >> Reference Value >> Consult Data Monitor Standard Value
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Consult Data Monitor Standard Value

NOTE: The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.

Monitor item

Condition

Reference values in normal operation

Wheel speed at left front axle

Vehicle stopped

0.00 km/h (MPH)

When driving *

Nearly matches the speedometer display (within +/-10%)

Wheel speed at right front axle

Vehicle stopped

0.00 km/h (MPH)

When driving *

Nearly matches the speedometer display (within +/-10%)

Wheel speed at left rear axle

Vehicle stopped

0.00 km/h (MPH)

When driving *

Nearly matches the speedometer display (within +/-10%)

Wheel speed at right rear axle

Vehicle stopped

0.00 km/h (MPH)

When driving *

Nearly matches the speedometer display (within +/-10%)

Air gap Reserve RL

--

NOT OK

--

OK

Air gap Reserve RR

--

NOT OK

--

OK

Longitudinal Acceleration

Vehicle stopped

Approx. 0 m/s 2

When during acceleration/deceleration

Changes according to the longitudinal acceleration/deceleration

Lateral Acceleration

Vehicle stopped

Approx. 0 m/s 2

When left/right turn

Changes according to the left/right turn

Turn rate

Vehicle stopped

Approx. 0 deg./s

When left/right turn

Changes according to the left/right turn

Steering wheel angle

When vehicle driving straight

Approx. 0 deg.

When steering wheel is steered to LH/RH

Changes according to the steered to LH/RH

Brake pressure

When brake pedal is not depressed

Approx. 0 bar

When brake pedal is depressed

Pressure increase according to brake pedal effort

Brake pressure at FL wheel

When brake pedal is not depressed

Approx. 0 bar

When brake pedal is depressed

Pressure increase according to brake pedal effort

Brake pressure at RL wheel

When brake pedal is not depressed

Approx. 0 bar

When brake pedal is depressed

Pressure increase according to brake pedal effort

Supply voltage solenoid valves

Ignition switch ON

--

Supply voltage of return pump

Ignition switch ON

--

Supply voltage of control unit

Ignition switch ON

--

VACUUM SENSOR

Engine running

--

Engine stopped

--

Status of brake vacuum sensor

Engine running

VALID

Engine stopped

INVALID

Signal high of brake light SW

When brake pedal is depressed

On

When brake pedal is not depressed

OFF

Signal low of brake light SW

When brake pedal is depressed

On

When brake pedal is not depressed

OFF

PARKING BRAKE

When electric parking brake is active

On

When electric parking brake is released

OFF

Status of switch ESP Off

When VDC function is OFF

Yes

When VDC function is ON

No

Outlet Valve Left Rear

Active

On

Inactive

OFF

PUMP

Active

On

Inactive

OFF

Acceleration sensor calibration

During calibration

Yes

Not calibration

No

*: Confirm tire pressure is standard value.