Engine Oil: Refilling
- Install oil drain screw with new oil drain screw washer. Refer to Exploded View
.CAUTION: Be sure to clean oil drain screw and install with new oil drain screw washer.
- Install engine oil filter. Refer to Removal and Installation .
- Refill with new engine oil.
Engine oil specification and viscosity: Refer to Fluids and Lubricants (For NORTH AMERICA)
Engine oil capacity
: Refer to Periodical Maintenance Specification .
CAUTION:- When filling engine oil, do not pull out oil level gauge.
- The refill capacity depends on the engine oil temperature and drain time. Use these specifications for reference only.
- Always use oil level gauge to determine the proper amount of engine oil in engine.
- Warm up the engine and check area around drain plug and oil filter for engine oil leakage.
- Stop the engine and wait for 10 minutes.
- Check the engine oil level. Refer to Inspection .
- Perform "MAINTENANCE". Refer to On Board Diagnosis Function
.NOTE: Reset a service interval after refill with engine oil.