DTC Description
WARNING: This page is about a different car, the 2018 Infiniti Q60. However, it is still accessible from the selected car via links, so may be relevant.
DTC DETECTION LOGIC
|
DTC |
Display item (Trouble diagnosis content) |
Malfunction detected condition |
|
C13D8-00 |
CONTROL MODULE (Control module) |
The malfunction in each motor angle sensor is detected. |
POSSIBLE CAUSE
- Main motor angle sensor
- Sensor circuit (between steering angle main control module and main motor angle sensor) is open or short.
- Steering angle main control module
DTC CONFIRMATION PROCEDURE
- DTC REPRODUCTION PROCEDURE
With CONSULT
- Turn the ignition switch OFF and wait for at least 10 seconds.
- Start the engine.CAUTION: Never drive the vehicle.
- Perform self-diagnosis for "DAST 1".
Is DTC "C13D8-00" detected?
YES
Proceed to diagnosis procedure. Refer to Diagnosis Procedure .
NO
To check malfunction symptom before repair: Refer to Intermittent Incident .
NO
Confirmation after repair: INSPECTION END