Diagnosis Procedure

WARNING: This page is about a different car, the 2018 Infiniti Q60. However, it is still accessible from the selected car via links, so may be relevant.

CHECK COMMUNICATION SIGNAL

Connect around view monitor control unit connector and door mirror (passenger side) connector.
Turn ignition switch ON.

Check the signal between around view monitor control unit harness connector and ground.

Terminals			Condition	Reference value
(+)		(-)
Around view monitor control unit
Connector	Terminal
B51	61	Ground	"CAMERA" switch is ON or shift position is "R".	Courtesy of NISSAN NORTH AMERICA, INC.

Is the inspection result normal?

YES

Replace around view monitor control unit. Refer to Removal and Installation .

GO TO 2.

CHECK CONTINUITY COMMUNICATION SIGNAL CIRCUIT

Turn ignition switch OFF.
Disconnect around view monitor control unit harness connector and door mirror (passenger side) harness connector.

Check the continuity between around view monitor control unit harness connector and door mirror (passenger side) harness connector.

With automatic drive positioner

Around view monitor control unit

Door mirror

(passenger side)

Continuity

Connector

Terminal

Connector

Terminal

B51

D57

Existed

Without automatic drive positioner

Around view monitor control unit

Door mirror

(passenger side)

Continuity

Connector

Terminal

Connector

Terminal

B51

Existed

Is the inspection result normal?

YES

GO TO 3.

Repair or replace malfunctioning parts.

CHECK CONTINUITY COMMUNICATION SIGNAL CIRCUIT

Check the continuity between around view monitor control unit harness connector and ground.

Around view monitor control unit		Ground	Continuity
Connector	Terminal
B51	61		Not existed

Is the inspection result normal?

YES

Replace side camera RH. Refer to Removal and Installation .

Repair or replace malfunctioning parts.