LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2018 >> QX30 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (Around View Monitor System) >> Around View Monitor System >> DTC/Circuit Diagnosis >> U1232 Steering Angle Sensor >> Diagnosis Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnosis Procedure

WARNING: This page is about a different car, the 2018 Infiniti Q60. However, it is still accessible from the selected car via links, so may be relevant.
  1. ADJUST THE PREDICTIVE COURSE LINE CENTER POSITION OF THE STEERING ANGLE SENSOR 

    Adjusts the steering angle sensor neutral position on ABS actuator and electrical unit (control unit) side. Refer to Work Procedure .

    NOTE: When DTC U1232 is detected, adjust the predictive course line center position of the steering angle sensor.

    GO TO 2.

  2. PERFORM DTC CONFIRMATION PROCEDURE AGAIN 

    Perform DTC confirmation procedure again. Refer to DTC Description .

    Is DTC U1232 detected again?

    YES

    Replace steering angle sensor. Refer to Removal and Installation .

    NO

    INSPECTION END

scientia non olet · About LEMON Manuals