Component Function Check
WARNING: This page is about a different car, the 2018 Infiniti Q60. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK REVERSE SIGNAL
With CONSULT
- Turn ignition ON.
- Select "REV SIG" in "DATA MONITOR" mode of "MULTI AV" using CONSULT.
- Check "REV SIG" indication as per the following condition.
Monitor item
Condition
Indication
REV SIG
Selector lever position
R position
On
Other than R position
Off
Is the inspection result normal?
YES
INSPECTION END
NO
Proceed to Diagnosis Procedure .