LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2018 >> QX30 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 47 (Engine Control System (Introduction) (3.0L)) >> System Description >> Diagnosis System (ECM) >> On Board Diagnosis Function >> SRT Status Mode
April 5, 2026: LEMON Manuals is launched! Read the announcement.

SRT Status Mode

WARNING: This page is about a different car, the 2018 Infiniti Q60. However, it is still accessible from the selected car via links, so may be relevant.

Description 

This function allows to read if ECM has completed the self-diagnoses of major emission control systems and components. For SRT, refer to System Readiness Test (SRT) Code .

Operation Procedure 

  1. Turn ignition switch ON and wait 20 seconds.
  2. SRT status is indicated as shown blow.
    • ECM continues to illuminate MIL if all SRT codes are set.
    • ECM blinks MIL for about 10 seconds if all SRT codes are not set.
    G05868475Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals