Diagnosis Procedure

WARNING: This page is about a different car, the 2018 Infiniti Q60. However, it is still accessible from the selected car via links, so may be relevant.

PERFORM SELF-DIAGNOSIS
With CONSULT
1. Erase self-diagnosis result for "CHASSIS CONTROL".
2. Turn the ignition switch OFF and wait for 10 seconds or more.
3. Turn the ignition switch ON.
4. Perform self-diagnosis for "CHASSIS CONTROL".
Is DTC "C1BBC-00" detected?

YES

Replace the chassis control module. Refer to Removal and Installation .

NO

INSPECTION END