Diagnosis Procedure
WARNING: This page is about a different car, the 2018 Infiniti Q60. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM THE SELF-DIAGNOSIS
- Turn the ignition switch ON.
- Turn the MAIN switch of ICC system ON, and then wait for 2 seconds or more.
- Perform "All DTC Reading" with CONSULT.
- Check if the "U1000" is detected as the current malfunction in "Self Diagnostic Result" of "BSW/BUZZER".
Is "U1000" detected as the current malfunction?
YES
Refer to Trouble Diagnosis Flow Chart .
NO
To check malfunction symptom before repair: Refer to Intermittent Incident .
NO
Confirmation after repair: INSPECTION END