Diagnosis Procedure
WARNING: This page is about a different car, the 2018 Infiniti Q60. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM THE SELF-DIAGNOSIS
- Turn the ignition switch ON.
- Turn the LDP system ON, and then wait for 2 seconds or more.
- Perform "All DTC Reading" with CONSULT.
- Check if the "U1000" is detected as the current malfunction in "Self Diagnostic Result" of "LANE CAMERA".
Is "U1000" detected as the current malfunction?
YES
Refer to Trouble Diagnosis Flow Chart .
NO
Refer to Intermittent Incident .