LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2018 >> QX30 Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission (Introduction And Basic Inspection) >> Basic Inspection >> Additional Service When Replacing Control Valve >> Work Procedure (After Replace Control Valve)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Work Procedure (After Replace Control Valve)

  1. PERFORM VIN REGISTRATION 

    SYMBOL With CONSULT

    1. Select "Work Support" in "TRANSMISSION".
    2. Perform "VIN Registration".

    GO TO 2.

  2. PERFORM WRITE CALL ID 

    SYMBOL With CONSULT

    1. Select "Work Support" in "TRANSMISSION".
    2. Perform "WRITE CALL ID".

    GO TO 3.

  3. PERFORM OIL LEVEL CHECK 

    SYMBOL With CONSULT

    1. Select "Work Support" in "TRANSMISSION".
    2. Perform "Oil level check".

    GO TO 4.

  4. PERFORM NORMALIZATION AND ADAPTATION 

    SYMBOL With CONSULT

    1. Select "Work Support" in "TRANSMISSION".
    2. Perform "Normalization and adaptation".

    WORK END

scientia non olet · About LEMON Manuals