Applicable Items

Mode

Function description

All DTC Reading

Display all DTCs or diagnostic items that all ECUs are recording and judging.

Self Diagnostic Results

Retrieve DTC from ECU and display diagnostic items.

Data Monitor

Monitor the input/output signal of the control unit in real time.

CAN Diagnosis

This mode displays a network diagnosis result about CAN by diagram.

CAN Diagnosis Support Monitor

It monitors the status of CAN communication.

Active Test

Send the drive signal from CONSULT to the actuator. The operation check can be performed.

ECU Identification

Display the ECU identification number (part number etc.) of the selected system.