Applicable Item

Conditions

Function

All DTC Reading

Display all DTCs or diagnostic items that all ECUs are recording and judging.

Work Support

This mode enables a technician to adjust some devices faster and more accurately.

Self Diagnostic Results

Retrieve DTC from ECU and display diagnostic items.

Data Monitor

Monitor the input/output signal of the control unit in real time.

CAN Diagnosis

This mode displays a network diagnosis result about CAN by a diagram.

Active Test

Enables an operational check of a load by transmitting a driving signal from the TCM to the load.

ECU Identification

Display the ECU identification number (part number etc.) of the selected system.

Programming

This function can write control program to new ECU. New ECU does not operate if programming of new ECU is not completed, though it is installed to the vehicle. For new ECU, for which programming operation is specified, programming operation is always necessary after installation to the vehicle.

Configration

Function to READ/WRITE vehicle configuration.