DTC Detection Logic
|
DTC |
CONSULT screen item |
DTC detected condition |
||||
|
[Trouble diagnosis content] |
[Malfunction type] |
|||||
|
C003A |
00 |
ESP control unit is incomplete [Control unit (Electronic Stability Program control unit) is malfunction] |
[NO SUBTYPE INFORMATION] |
Diagnosis condition |
Ignition switch ON |
|
|
Signal (terminal) |
-- |
|||||
|
Threshold |
Electronic stability program control unit is malfunction (Valve relay is not switched OFF using the serial interface command processing). The error is set during the Fail-safe logic test initialization. The error is set if the error detection time is exceeded. |
|||||
|
Diagnosis delay time |
0 ms |
|||||