DTC Detection Logic
|
DTC |
CONSULT screen item |
DTC detected condition |
||||
|
[Trouble diagnosis content] |
[Malfunction type] |
|||||
|
C0042 |
00 |
BR pedal posi sen circuit A (subfault) [Overheating of component (High-pressure and return flow pump)] |
[NO SUBTYPE INFORMATION] |
Diagnosis condition |
Ignition switch ON |
|
|
Signal (terminal) |
-- |
|||||
|
Threshold |
Return pump: If during the diagnosis of the return pump for a defined time (t above 30 seconds), an error is set due to a long overheated pump motor and valve control (pump motor and high-pressure valve 1 and switching valve 1 or pump motor and high-pressure valve 2 and switching valve 2 are activated). The error is set if the error detection time is exceeded. |
|||||
|
Diagnosis delay time |
30000 ms |
|||||