DTC Detection Logic
|
DTC |
CONSULT screen item |
DTC detected condition |
||||
|
[Trouble diagnosis content] |
[Malfunction type] |
|||||
|
C05F3 |
00 |
CAN message E-IGN lock C/U [The CAN message from control unit (Electronic ignition lock control unit) is malfunction] |
[NO SUBTYPE INFORMATION] |
Diagnosis condition |
Ignition switch ON |
|
|
Signal (terminal) |
-- |
|||||
|
Threshold |
If the Signal stop coordinator stop state signal actuation module front from the electronic ignition switch control unit is invalid (signal value is beyond the valid range) then an error is set. This error is set, when the malfunction detection time is exceeded. |
|||||
|
Diagnosis delay time |
1500 ms |
|||||