LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2018 >> QX30 Essential, AWD >> Repair and Diagnosis (Single Page) >> Brakes >> Brakes Control Systems >> Brake Control System (DTC/Circuit Diagnosis) (4 Of 5) >> DTC/Circuit Diagnosis >> DTC C0601: Steering Column Control Module System >> DTC Description >> DTC Confirmation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Confirmation Procedure

  1. PRECONDITIONING 

    If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

    GO TO 2.

  2. CHECK DTC DETECTION 

    SYMBOL With CONSULT

    1. Vehicle on a flat area (standstill).
    2. Turn the ignition switch ON.
    3. Erase self-diagnosis result for "ABS".
    4. Turn the ignition switch OFF.
      NOTE: Wait at least 10 seconds after turning ignition switch OFF.
    5. Turn the ignition switch ON.
      NOTE: Wait at least 10 seconds after turning ignition switch ON.
    6. Perform self-diagnosis for "ABS".

    Is DTC "C0601" detected?

    YES

    Proceed to Diagnosis Procedure .

    NO

    To check malfunction symptom before repair: Refer to Intermittent Incident .

    NO

    Confirmation after repair: INSPECTION END

scientia non olet · About LEMON Manuals