DTC Detection Logic
|
DTC |
CONSULT screen item |
DTC detected condition |
||||
|
[Trouble diagnosis content] |
[Malfunction type] |
|||||
|
C065A |
00 |
CAN message ECM [Network: Message from engine control module incorrect (data corrupt error)] |
[NO SUBTYPE INFORMATION] |
Diagnosis condition |
Ignition switch ON |
|
|
Signal (terminal) |
-- |
|||||
|
Threshold |
If the message from the transaxle mode switch is not received (missing signal or timeout) then an error is set. This error is set when the malfunction detection time is exceeded. |
|||||
|
Diagnosis delay time |
150ms |
|||||