DTC Detection Logic
|
DTC |
CONSULT screen item |
DTC detected condition |
||||
|
[Trouble diagnosis content] |
[Malfunction type] |
|||||
|
C065B |
00 |
CAN message ECM [Network: Message from engine control module not received (timeout error)] |
[NO SUBTYPE INFORMATION] |
Diagnosis condition |
Ignition switch ON |
|
|
Signal (terminal) |
-- |
|||||
|
Threshold |
If the message from the transaxle mode switch is incorrect (message length or checksum is incorrect) then an error is set. This error is set when the malfunction detection time is exceeded. |
|||||
|
Diagnosis delay time |
150 ms |
|||||